If you have an AC unit and it starts to overheat, there are a few reasons. The first is that the AC unit could be defective. If this is the case, your appliance might not be able to cool properly and could cause health risks. There are also several other factors that can contribute to an AC unit overheating. One is that the compressor is running too often or too slowly.
10 Reasons of AC Unit Overheating
Most people think that when their AC unit starts overheating, it’s because the air conditioning is not working well. However, there are a few reasons why your AC unit might overheat. Here are ten reasons:
You have a dirty air filter. Dirty filters collect pollen, dirt, and debris from the air. When these particles get trapped inside the filter, they clog up the airflow and cause overheating.
Your fan speed needs to be appropriately set. If your fan is running at full blast, and your AC unit is not producing enough cooling airflow, then your fan speed setting is incorrect. Set your fan speed to low and try again.
There is a problem with the coil. A lousy coil heats up faster than a good one, especially if it's old. To check whether the coil is working, turn off the power switch, remove the cover plate (if any), and look at the wires attached to the coils. If there is black residue on them, it means the coil is faulty. Clean the coil with compressed air.
The condenser fan motor may need replacing. If the fan blades aren't spinning fast enough- if they're dragging along the ground instead of moving air around freely- then the fan motor might need replacement.
Check the blower wheel alignment. Blowers use a system of belts and pulleys to transfer the mechanical force created by the fan motors' rotation to the blower wheels. Improper belt tensioning or damaged pulleys can lead to less-than-efficient blower operation and excessive heating.
Check the electrical connections. All electric fans require electricity to operate. If you've noticed a buzzing sound coming from the fan, chances are it's caused by loose wiring or worn contacts. Tighten those connections before trying to fix anything else.
Inspect the ductwork. Air ducts should always be inspected at least twice per year. Loose joints, cracks, or holes mean air leaks out of the ductwork, causing the room to overheat. Fix the leak immediately!
Install a programmable thermostat. Programmable thermostats allow you to adjust the temperature settings throughout your home. This way, you can turn the AC down during the day and leave it on all night.
Keep the area well-ventilated. Open windows and doors to let outside air circulate through your house. Make sure to keep your blinds closed and open only when necessary.
Try switching to a reverse cycle mode. The reverse cycle option forces your AC to run continuously while the compressor remains inactive. This will help cool the room quicker when temperatures rise.
In conclusion, the AC unit in a home may overheat if it is not being used frequently. If the AC unit is not constantly being used, it may overheat and cause damage to the unit.
Comments